Oil - Lubricant - Grease Industries

Product Details:

The German technology based volumetric oil filling machine is designed with an accuracy of +/- 0.1% to fill the oil in pet bottles / square jars / tin from 100ml to 5000ml. Oil filling machine for edible oil and lube oil industries is widely used to fill various types of liquids in different volume. Only minimum adjustment required for setting different capacity from 100ml to 5000ml with varying containers. The high tech servo volumetric oil filling machine is capable of filling 48-54 BPM of 1000ml and 12 to 14 BPM of 5000ml. Machine is having its own pumping system to connect the machine with the tank. The volume to be filling is measured by the servo flow measuring devices with a filling accuracy of +/- 0.05%.

Additional Information:

• Item Code: 128

Product Details:

Description:

• Filling operations works on the piston & cylinder & N.R.Vconcepts.
• Filling unit consists of 8 piston cylinder assembly & non-returnvalvesforthis. Common drive is taken.
• When bottles or jars comes under filling station as topper mechanism holds the bottles till the filling takes place and release after filling finishes.
• At a time 8 bottles will filled and comes out from exit conveyor.
• From exit conveyor bottles will be transfer red to the input conveyor of capping machine.
• Capacity up to 1 liter.

Product Details:

High speed & high precision weighing is the uniqueness of multi head weigh filler. IPM Series is well for its pouch finish & sealing intactness which prevents leakage of inert gas from pouches and gives extended product shelf life.

Product Details:

Descriptions:

• The Bottles coming out of the Filling Machine is taken in to the input conveyor of the Capping Machine.
• The Bottles will be taken into the turret of the capping machine.
• The caps dumped into the vibratory will come out of the chute after orientation.
• At the first station the caps will be placed in the Bottles with a pick and push mechanism. This mechanism will ensure the placement of the cap (properly aligned) on the Bottles without any damage to the cap locks.
• At the next station the caps will be capped by special capping tool. The capping torque can be set on the tool.
• After capping the capped Bottles will be released on the output conveyor.

Product Details:

Machine works on the basic principle of to seal the filled bottle. This model consists of Linear Screw Capping Device. The filled bottles have to be loaded on the conveyor and conveyor transfers the bottle from one end to other end. During the transportation of the bottle, there is one device fitted on the body which picks up the bottle and convey the bottle with gripping with the help of pressing device. When the bottle enters into pressing device, there are six sealing rollers mounted on the sealing head and sealing head is mounted on the machine which is adjustable in height and width. The sealing rollers are provided with separate A.C frequency drive so that we can adjust speed of the sealing roller. The basic machine will be designed as per our discussions. The bottles have to feed manually on conveyor and caps are also to be place manually on the bottles. The machine will tighen the caps on the bottles.

Product Details:

Description:

• High Production Speeds.Mild steel structure cladded with SS304 sheet to meet GMP norms.
• Accurate label placement.
• Product data storage facility.
• No change parts reqirements.
• Very less down time for change over.

Product Details:

Description:

• Equipped with side double belts can transport both heavy and light cartons and keeps sealing on the center of cartons.
• Suitable for various carton sizes for adhesive tape sealing, with compact design can be used in many different working spaces.
• Optional extensive working tables can integrate various packaging equipment working on a packing line.
• Modular designed Aluminium alloy arch, easy to assemble and disassemble.
• Auto strap positioning and retry feeding functions enable operating of humanity. Convenient operating modes with panel, ball switch and foot pedal switch.
• Internal electricity is 24V accessing, prevent operators from shocking. with CKD frame and powder painting on frame.

Specifications:

Product Details:

Descriptions:

• Adopt original labeling technology to ensure the stability of labeling and positioning accuracy. No air bubble, no wrinkle, and raise the additional value of products.
• The frame and shell adopt stainless steel and high class aluminium alloy anodic treatment, the useful time is long.
• Adopt famous factory step motor to ensure high load and long period operation.
• With PLC, cluch and electric eye control, ensure the labeling accuracy, the operation is simple and convenient, the function is stable.
• Open frame, adjust the label paper of different sizes and change parts are all convenient.
• Disconnect - type design for the glue-plate, frictioning knife and glue-wheel, so the cleaning is very easy.
• The efficiency is about three to four times than manual operation, reducing labor cost, and management cost.
• With the functions of auto correction and automatic detection when no label.
• With the functions of fault alarm and production counting.

 

Product Details:

Hand-held pneumatic capping machine widely applicable to any thread of open or tighten screw cap, it has a wide range of screw cap from bottle height, shape, size, weight and unscrew cover can twist the cap, easy operation, low fault rate, low prices, and other features, is the best tighten screw cap...etc. Especially suitable for large bottle, and heavier or bottle shapes, or lid specification more bizarre twist, often change of covering.

Product Details:

Descriptions:

• Brake disc stretch
• Home position: The Turntable always stops at the same position.
• Both one touch automatic programs and manual run available.
• Top/bottom wrapping number selected
• Height seeking by photo sensor
• Wrapping tension/turntable speed/ carriage speed are adjustable
• Slow start and stop
• Re-set button to make the machine neutral from any operation.
• Reinforcing wrapping in the middle of package by manual.

Product Details:

We are leading manufacturer & supplier of wide range of Grease Filling Machine (SingleHead). These machines can be availed from us in different grades and dimensions as per the requirement of the clients to meet their requirement in a better way. In this Cylinder to verify the presence of slot in the bell assembly. Fixture to inspect the correct size of the balls in the bell assembly.

Product Details:

Specifications:

Product Details:

We are offering Automatic Strapping Machine.

Product Details:

This automatic L-Bar sealer shrinking machine uses a belt transfer system together with a synchronized film advance to transfer product from the in feed belt into the L-bar sealer is a production sealing machine capable of speeds upto 25 packages per minute depending on package size and configuration of product.
Description

• Hot knife sealing system with center sealing.

• Multi pin perforator wheel for air evacuation.

• Teflon coated sealing blade.

• Film rack-cradle roller style or film cores and shafts.

• Film rack side adjustable for perfect alignment of film rack and inverting head.

• Power film unwind.

• Film inverter for inline product feed with PID function

• Safety shut down switches.

• Able to pack single or multiple packages.

• Horizontal and vertical photocell for package detection.

• Seal head height-max 130mm.

Specifications:

Product Details:

We are offering Can Seaming Machine.

Product Details:

The Machine is suitable for tightening of pre threaded plastic caps with the set torque. A self releasing clutch mechanism shall be provided to tighten the caps to pre set torque. The caps shall be placed manually on the container mouth. The container to be located under the capping head by the operator reference locators provided. The head comes down pneumatically on the actuation of the sensor. After tightening cap to the set torque the head will move up.

Product Details:

SIGMA - II has been developed especially with a view to meet the exacting needs of the packaging industry. The system's reliability is a direct result of Electronics Devices' expertise in inverter and sealing coil design. The combination allows manufacturers to seal containers efficiently at desired line speeds.

Product Details:

Descriptios:

• Rugged, long life design.
• Unique film cradle for quick, easy film adjustment and changeover.
• Height adjustment ensures that the sealing line is in the center of product.
• Hot knife sealer system (Teflon coated).
• Automatic conveyor belt transports the product into tunnel.
• High efficiency heat tunnel is thermostatically controlled up to 400 degrees.
• Hot air cycling tunnel with velocity control.
• Automatic cool down function.
• Heavy-duty base with tool parts drawer.

Specifications:

Product Details:

The IPM-Ex, which is the Ex Proof box model of IPM series is ex-proof (x d II A/B T6) and is suitable for the environments where flammable chemicals, gases or petroleum products present, with its structure protected against the impacts. IPM-Ex can be used as an indicator for electronic weighing instruments as well as it can be used individually in various automatic weighing applications, tank weighing, loading, discharging systems in the business with its rich industrial input and output options or several solutions can be created by communicating with other electronic devices such the PLC, computer etc.

 

Specifications:

• Semi Automatic

• Ex Proof aluminium cast box

• 6 digit red LED weight indDuo-Roto Labeling Machineicator

• Magnetic isolated keypad outside the box

• Tare, zeroing, function and setting keys.

• Zeroing within the entire measuring range

• Gain setting suitable for the load cell output

• Ability to show input and output voltage of the load cell

• Non-volatile memory resistant to blackouts.

• Industrial standard adjustable Modbus protocol

• Special nozzle design for diving (Bottom filling)

• Anti foaming nozzle.

 

Product Details:

Description:

• 6 digits fluorescent displays.
• 6 membranes pushbuttons.
• A/D Conversion rate: 200/second.
• Set point update rate can reach to 50time/sec.
• Maximal driving eight load cell (350Ä¿¿©).
• RS -232/RS-422 Serial communication connector.
• Automatic zero tracing.
• Motion sensitivity detection function.
• Indicator is 5VDC; the max output of the electric current is 120mA. It can run 8 load cells (350 ohms). The load cell connector is 7 pin COMBICON type jack, connected by 7 core load cell.

Product Details:

Descriptions:

• Integrated sealing and shrinking in one step.
• Transparent hood makes the sealing and shrinking visible.
• Adopts glass fibre cutler's isolator and nickel alloy cutter in order to result in perfect sealing line, to avoid the film sticking the cutter.
• Special roller with pin to make small holes on the film.
• Might not make over hot around environment after long time operation.
• The height of the package supporting mesh inside the chamber can be adjusted for different sizes of products.
• It assembled castors with brake on the bottom of supporting base, to move and fix the machine freely

Specifications:

Description :
This machine is designed to seal the carton by applying adhesive tape. It is cost effective,high speed and easy changeovers. Conveyor belt tension and tape tension are adjustable to meet the needs of soft / hard cartons. This machine can be integrated into production line or as stand alone machine. These machines are top n bottom belt drive, pneumatic controls for upper tape head, used in circumstances where carton size is changed frequently. The Automatic adjustments can be obtained for width and height of the carton.

Description  :

• labelling assembly for application of self-adhesive body label (or body + back labels from 1 only reel)
• Labelling assembly equipped with stepping motor for high precision in label application
• Label release with electronic card
• Easy adjusting of spacing between front + back labels by combined mechanic-electronic system
• Easy adjusting for bottles with different diameters, without need of change parts
• Base-frame in stainless steel, with aluminum parts covered with anti-rust painting

• P.C. Linkable.
• Construction is made up of Stainless Steel.
• Instant Startup and Shutdown.
• Prints on porous & non-porous surfaces.
• Graphic 128 X 64 backlight liquid with crystal display and integrated keyboard.
• Dimensions 20 X 30 X 36 Cm
• Operates on 0 ā€“ 45 degrees C, 10 ā€“90% relative humidity non-condensing.
• External connection product detection via 12 vdc NPN sensor with 9 ways D ā€“ Type connection.
• Software consists of Real time clock and Calendar, Expiry date, Prints logo.
• 9 Levels of Bowdlerization width adjustment character, message reverse and or invert print.
• Continuous print or print on detection with connection to PC for downloading data.
• Stores up to 45 messages and 120 characters per line.
• Pre mix inks packed with disposal cartridges.
• Oil or alcohol based inks for variety of applications.
• No pumps or a mechanical part hence low of running cost is low.
• Reliable Print heads capable of printing from 1 mm height up to 17mm height.

 

Description :

The High Resolution printer is a completely new Innovation in both function and appearance.The operation is extremely easy and the user can install all kinds of character font freely. The printer can read USB information directly, no need connect with PC. The new function of flash printing make sure the printhead will not block within 10 minutes when there is no substract go through. It can print dynamic barcode, dynamic 2-D barcode, Random code and etc.

The machine is designed with high efficiency with low power consumption; it will seal the containers with the same speed with lower power consumption which will save on the power costs.

• Easy & simple to use. All controls are installed on sealing head, which is easy to access for the operator.
• Warning lights for all main functions on the display.
• Unique air-cooled design, no water changes and no pump break downs.
• Slim design saves space.
• High efficiency with low power consumption.
• Same speed with lower power consumption which will save on the power costs.
• Modular component design, dependable & reliable SMD technology.
• With a warning alarm. Loud audible signal to alert the user problems.
• High speed & effective. Though the opening that is stained , oil stains or powder, the bottle can be seal edactively.

Product Details:

We are offering Sealing And Shrinking Machine.

Product Details:

DUO ROTO labeling machine is a universal machine for two sided labeling of flat and elliptic packages (front/back) as well as round ones (wraparound). It works with paper, foil, transparent, metal coated labels.